Windows 7 - sve verzije ovde

Microsoft Windows 7 Ultimate (x86/x64)    


FILE: en_windows_7_ultimate_x86_dvd_x15-65921.iso
SIZE: 2.501.894.144 bytes
SHA1: 5395DC4B38F7BDB1E005FF414DEEDFDB16DBF610

 







Link(s) Checked-(10.6.2010. - 9:33)-CroPirat

 
- Type : Operated system.
- Release date : 22. October 2009.
- Status : @ K D
- Platforms : x86-32, x64-64, EM64T.
- Version : x86/32-bit | x64/64-bit.
- Build : 7600 RTM (Final).
- Service Pack : Not available at the moment.
- Licence type : OEM.
- Activation : Not required.
- Serial : Not required.
- Language : English.
- Creator : faXcooL
- Uploader : Viper3773

 






Link(s) Checked-ALL DEAD-(10.6.2010. - 9:36)-CroPirat

 
File: Windows.7.x86.Build.7264.Netbook.Edition.iso
Size: 1 480 4275 20 bytes
MD5: 5EAEE9B6CBA905FF5691FD172F32E427
SHA1: 8B49F2A7A8DB22004985AD7E905435753545A82A
CRC32: 02404775

The Eee7 is a special version of Windows 7 Ultimate, based on the last edition 7264, made by the group "ModMyEee" and occupies only 1,49 GB USB drive and at 4 Gb hard disk. Operates on any netbook, the Eee PC 7 "4GB, until the last Sony Vaio P series and is faster and the XP SP3. No major operation has not been deducted. All networking capabilities remained intact. Hardware support is not removed.
Some of the things that have been removed:
Old drivers, games, Asian languages (can be added later), the files, and more.

System Requirements:
Hard Drive 4GB
RAM 256mb (recommended 1GB)
CPU according to the netbook, 900 MHz +

The above iSO file is not bootable from a USB Stick, to make it bootable from a USB Stick follow the instructions below

Important Information:

* When installing Eee7, The final phase of installation (Finalizing Installation) could take some time depending on the netbook to have.

* If you do not have drivers for Vista to install the devices , then simply download the drivers for XP, go to the executable file (. Exe) that you downloaded, right click -> Properties -- > Compatibility and check the option "Run this program in compatibility mode" for:
Windows XP (Service Pack 2)

To be able to install the netbook due to lack of dvd drive,we should prepare a USB Flash to make it bootable.

What we need:

* USB Flash Drive (2GB + more)
* The DVD which we burned the image of the iso that you downloaded
* A computer with Vista / Windows 7

Step 1: Formating the USB Flash

The following steps we will use the command prompt to create the appropriate Usb flash fomat with diskpart. [Note: It will erase all the data on USB Flash, be careful.]

1. Connect the USB Flash Drive

2. Open the command prompt as ............. (Go Start> All Programs> Accesories, right click on the "Command Prompt" and select "Run as ............."

3. To find out what number corresponds to the USB Flash Drive you should type the following in the window of the "Command Prompt":
diskpart
list disk
The number corresponding to your USB will be appear in the list (see the USB and the capacity of)
This number will need in the next step. Suppose that the USB Flash Drive is the disk 1.

4. Format the USB typing the following commands in the same window. Attention, replace the number "1" on disk 1 to the number of your drive as emerged from the above list.
select disk 1
clean
create partition primary
select partition 1
active
format fs = NTFS
assign
exit
When you enter this, you will have a USB Flash Drive formatted ready to be bootable.

Step 2: Let's make the USB bootable
we will use the application bootsect that is in the EEE7 DVD.
We will use the same command prompt window from Step 1:
1. Put the dvd of Eee7 in the drive of your computer.
2. Change the drive in the command prompt with that which is your drive. Suppose that the DVD drive is D:
d:
cd d: \ boot
3. We will use the bootsect to define the USB as a bootable NTFS drive ready to accept the Eee7.
Suppose that the USB Flash Drive is G: \, your position in G: \ put the letter of your USB.
Enter:
bootsect / nt60 g:
4. You can close the command prompt,now the USB is bootable.

Step 3: Copy files from DVD to USB Flash drive
The easiest way is through the windows. Copy all files from DVD and paste it in the USB flash drive. Just copy all the files, you're ready.

Step 4: Set the BIOS to boot from USB

Size : 1412 MB





Link(s) Checked
25 Jan 10-Sharinmatrix Link(s) DEAD
CroPirat

 
Windows 7 Seven Ultimate Fully Activated For Ever (Reupload 04-23-2010)

Windows 7 Seven Ultimate Fully Activated For Ever
Size: 3.47 GB
No serial and no activation needed
32/64-bit | Multi Languages | DVD ISO | Bootable | Activated

Install:
- Download and extract using WinRAR.
- Use NERO to burn the ISO image called "faXcooL.Windows.7.Ultimate.ENG.x86-x64.ACTiVATED"
- Burning speed should not be faster than 4x. Otherwise, it might not work.
- Restart your computer.
- Make sure you've seleceted your DVD-ROM/RW drive as a first boot device

* Enter the BIOS pressing the DEL button, set the option, insert your Windows 7 installation and restart computer.
- The black screen will appear (image 01).
- Press any key to boot from CD or DVD.... (by pressing the key you're entering the setup)
- Select your language, time and currency and keyboard input (optionaly)
- Click install now
- Choose your edition (x86 is 32-bit, x64 is 64-bit) depending of CPU type you have.

*Choose x64 if you have 64-bit processor.
- Click "I accept".
- Click "Custom (advanced).
- Choose your partition/hdd drive where Win7 should be installed and click format.

*You might get some error if you have two or more hard disks with different connectors (ATA and SATA).
If you get an error, turn off one of your hard disks and repeat the whole proces.
- After formatting, setup will continue automaticly and it will finish after 15-30 min.
- Next step would be username (Image 17).
- Type your password (if you want).
- When you get the screen for CD-KEY just ignore it leaving blank.

*Uncheck the box for automaticly activation and click next.
- Choose the third option for next step.
- Select your time zone.
- Select your current location (Home is recommended).
- The black CMD windows will appear. Wait a few seconds until computers restares once again.
- And that would be all about installation. You're in Windows now.

Activation:
It's not required, because it's OEM. Windows will be premanently activated.
However, it's well known that there is some problems with DELL and HP machines.

Important notes:

1- Remember When Windows is finalizing Its Installation There Will Be A Black Screen Appear (cmd) Prompt It will Stay Blinking for about 2 to 10 mins Depending on the system you are using Then It Will say ***-***-***-***-**** Key Installed Successfully Then It Will restart Automatically. Then U can go to My computer`s Properties U Will See Windows Is Activated.

2- DELL and HP machines, Use an Activator or the crack supplied if anything. 80% the activators will work meanwhile the other 20% depends on how old your Laptop/Computer, If you did an Upgrade you'll have to use an Activator regardless because this Version was made for a fresh installation.

3- If you do not want to be forced to use an activator I'd do a Custom install but you don't really have to format your driver due to the fact that Windows 7 will just overwrite your current windows and put the old windows in a folder called "Windows.old" where your previous windows installion files are kept. And it's optional if you choose to deleted the olf folder because the drivers are "surpisingly" there after installation. Make sure you are connected to the internet before and after the installion (meaning that when your ready to set up your connection.Go for the fresh Installation if you dont really have important programs you can easily re-install at a later time.

4-Burn the ISO image at the lowest speed possible and Also your burning app. must verify the burn (the ISO)......
System Requirements & Info:
If you want to run Windows 7 on your PC, here's what it takes:

*1 gigahertz (GHz) or faster 32-bit (x86) or 64-bit (x64) processor
*1 gigabyte (GB) RAM (32-bit) or 2 GB RAM (64-bit)
*16 GB available hard disk space (32-bit) or 20 GB (64-bit)
*DirectX 9 graphics device with WDDM 1.0 or higher driver

Windows 7 is the easiest, fastest, and most engaging version of Windows yet. Better ways to find and manage files, like Jump Lists and improved taskbar previews, help you speed through everyday tasks. Faster and more reliable performance means your PC just works the way you want it to. And great features like HomeGroup and Windows Touch make new things possible. Get to know Windows 7, and see how it can simplify just about everything you do with your PC.
So if you have issues with pre-activation you'll be forced to some activator to activate Windows 7.

 






Link(s) Checked-(10.6.2010. - 9:39)-CroPirat

Windows 7 ULTIMATE Fully Activated,Genuine & Updatab  



--> Remember when Windows is finalizing its installation, a black screen will appear (cmd), it will stay like this for about 2 to 10 mins Depending on the system you are using Then It Will say ***-***-***-***-**** Key installed successfully. Then it will restart automatically. After this, you can go to My computer's Properties, Windows is NOW activated!

--> FOR DELL and HP machines
80% : the activators will work meanwhile the other 20% depends on how old your laptop/computer, If you did an upgrade you will have to use an external activator because this version was made for a clean installation.

--> If you do not want to be forced to use an activator. I would do a custom install but you don't really have to format your driver due to the fact that Windows 7 will just overwrite your current windows and put the old windows in a folder called "Windows.old" where your previous windows installion files are kept. And it is optional if you choose to delete the old folder because the drivers are there after installation. Make sure you are connected to the internet before and after the installation.
Go for the fresh Installation if you dont really have important programs you can easily re-install at a later time. ( I RECOMMEND THIS )

 







Link(s) Checked-ALL DEAD-(10.6.2010. - 9:41)-CroPirat